|
|
Discount Fabric
AllBrands.com
|
|
All Patterns, images and instructions are copyright protected.
Please read our Terms & Conditions before using our patterns.
|
Water Block Two is made up of one tall strip, divided into three parts. This block is the first block
of row two. The block consists of water, with the tip of a reed coming up from the lower edge.
Measures 2.5" wide x 8.5" tall
|
WATER BLOCK 2
Pattern Pieces
OVERALL LAYOUT
Print out a copy of the overall layout so you'll know where each block goes.
|
NOTE ABOUT PRINTING: Be sure your printer is set to print at 100%. If "Shrink to fit" or "Fit to page" etc. is selected,
YOUR PATTERN PIECES WILL NOT PRINT TO THE CORRECT SIZE. Every pattern page lists one or more dimensions.
CHECK YOUR PRINTED PATTERN FOR ACCURACY OF SIZE.
|
1. Lay out fabric pieces (figure 1).
2. Stitch Piece B to Piece C (figure 2).
|
figure 1
|
figure 2
|
3. Stitch Piece A to Piece B (figure 3)
4. Use a quilter's square to trim the block. The finished block should measure 2.5" wide by 8.5" tall (figure 4).
|
figure 3
|
figure 4
|
|
|
|
