All Patterns, images and instructions are copyright protected.
Please read our Terms & Conditions before using our patterns.
Water Block One is made up of a long strip, divided into three parts. This block makes up the entire top row of the
wallhanging. NOTE: I used rust for the reed in this wallhanging; in a second wallhanging, I used light green
for the reed in this block. The finished wallhanging on the main page shows the reed in light green.
Measures 16.5" x 2.5"
WATER BLOCK 1
OVERALL LAYOUT Print out a copy of the overall layout so you'll know where each block goes.
NOTE ABOUT PRINTING: Be sure your printer is set to print at 100%. If "Shrink to fit" or "Fit to page" etc. is selected,
YOUR PATTERN PIECES WILL NOT PRINT TO THE CORRECT SIZE. Every pattern page lists one or more dimensions.
CHECK YOUR PRINTED PATTERN FOR ACCURACY OF SIZE.
There are two pages of pattern pieces for water block 1. Piece A is too large to print to one page, so is
divided. Once piece A is cut out, tape it together at the dotted lines, as shown below.
Water Block 1 Pattern
Print out the patterns for this block. Our patterns download as pdf files. For instructions on downloading pdf files,
go to: pdf instructions.