|
|
Discount Fabric
AllBrands.com
|
|
|
|
Bear Paw / Bear Claw QuiltFabric Requirements/ Cutting Instructions
Page 2 of 2 |
All Patterns, images and instructions are copyright protected.
Please read our Terms & Conditions before using our patterns.
|
Use 1/4" seam allowances
NOTE: Each finished block will measure 14.5" x 14.5"
Supplies Required for Queen Size Quilt (20 blocks)
NOTE: Fabric requirements are based on fabric width of at least 42". I have allowed a bit extra
Background Fabric:
3 yards: This covers four small 2.5" x 2.5" outer squares, four 6.5" x 2.5" strips, and background part of claw squares.
Fabric #2 :(Large 4.5" x 4.5" squares)
1.5 yards: This covers four small 2.5" x 2.5" outer squares, four 6.5" x 2.5" strips, and background part of claw squares.
Fabric #3 :(paw tips and small 2.5" center square)
1.75 yards
|
Cutting Instructions
Background Fabric:
Claw background:
Cut 14 strips measuring 3.5" x w.o.f. (width of fabric). This means you will have 14 strips of fabric measuring 3.5" wide by about 44" long.
Cut the strips into 3.5" segments. You will a total of 160 3.5" x 3.5" squares (8 per block x 20 blocks).
Four small corner blocks:
Cut 4 strips measuring 2.5" x w.o.f. This means you will have 4 strips of fabric measuring 2.5" x about 44".
Cut the strips into 2.5" segments. You will need a total of 80 2.5" x 2.5" squares (4 per block x 20 blocks).
Four strips (strips that separate claws):
Cut 14 strips measuring 2.5" x w.o.f. This means you will have 14 strips of fabric measuring 2.5" x about 44".
Cut the strips into 2.5" segments. You will need a total of 80 2.5" x 2.5" squares (4 per block x 20 blocks).
Fabric #2: (large squares)
Cut 9 strips of fabric measuring 4.5" x w.o.f. This means you will have 9 strips of fabric measuring 4.5" x about 44".
Cut each strip into 4.5" segments. You will need a total of 80 4.5" x 4.5" squares (4 per block x 20 blocks).
Fabric #3: (small center square and claw tips)
Cut 8 strips of fabric measuring 3.5" x w.o.f. This means you will have 8 strips of fabric measuring 3.5" x about 44".
Cut each strip into 3.5" segments. You will need a total of 160 3.5" x 3.5" squares (8 per block x 20 blocks).
Cut 2 strips of fabric measuring 2.5" x w.o.f. Cut these strips into 2.5" segments. You will need a total of 20 2.5" x 2.5" squares
(1 per block x 20 bocks).
ASSEMBLING QUILT BLOCK
Go to page 1 for block assembly instructions.
|
|
|
|
